|
|
 |
| Location : Products > Wireless Kits > LCD wireless kits |
 |
| W386D1 |
>Digital wireless security kit >High resolution picture >Stable signal and anti-jamming technology >200M transmitting range in open area >Receiver and camera talk to each other >Built-in rechargeable Li-battery lasts for 3 hours |
|
 |
Function parameters |
| Function: | | ●Digital wireless video surveillance,clear picture.●LED lights indicates volume of the kit●Digital audio monitoring,volume of audio is adjustable ●Two way speaker function ●Back to status of monitoring when no operation interdium above 30 seconds●Antenna indicator keep sparking when camera is not within transmission distance ●Power supply:power adaptor and battery ●Low power indication and charing indicator |
|  | | Applying Enviroment: |  | |  | | Real product digram: |  | | Diagram of W386D1： |  | | Specs: | Items | Specs | | Receiving Frequency | 2.400GHz～2.483GHz | | TV Systems: | PAL/NTSC optional | | Method of regulation | FSK | | Working Temperature | -20~60℃/-10~50℃ | | View Angle(U/D/L/R) (CR>10) | 10/30/45/45(Min) | | Definition(dot) | 480(W)x240(H) | camera | TV System | PAL | NTSC | | Valid pixel | 628(H) x 582(V) | 510(H) x 492(V) | | Image Device | 1/4″ CMOS Image sensor | | Horizontal Definition | 380TV Line | | Transmission Signal | Video, Audio | | Minimum Illumination | 3Lux/F1.2 | | Scan Frequency | PAL/CCIR: 50Hz NTSC/EIA:60Hz | | Open Transmission Distance | 200M | | Power | DC5V/800mA | | Transmission Power | 17dBm | | Transmission Frequency | 2.400GHz～2.483GHz | receiver | Sensitivity: | ≤-85dBm | | LCD | 2.4'' TFT LCD | | Power off at low voltage | Power off automatically when voltage is lower than 3.3V | | Power : | DC5V/800mA | | Size: | 123x72 x 24mm | | Weight: | 200g | | Receiving Signal： | Video, Audio | | Battery: | Build-in 3.7V/350mAh lithium battery | | Power Consumption | ≤3W |
|
| FAQs: | | | 1） Why there is no video when both the camera and the receiver are turned on? | | | | Usually the video will be on the monitor because we have done code matching before sales.If this case does happen, you have to do code matching again like this, push the power button of the camera and the receiver at the same time for about 5 seconds until the video is on monitor; | | | 2） Why I can not receive the video when receiver aparts from the camera for a certain distance? | | | | Check if the distance is more than 200 meters or there are obstacles between the receiver and the camera. | | | 3） Why suddenly there is no video or video stopped when I use the kit without power supply but with batteries? | | | | Power of batteries are used up,you have to recharge the kit, or connect them with power supply. | | | 4） Why I can not hear the voice out of the camera when somebody talk to the receiver ? | | | When someone talk to the receiver,the button of TALK on monitor should be pinnd down.Second check the volume of the monitor,if it is loud enough. |
|
|
|
Wireless Kits
